http://www.murata.com/ data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s specifications are subject t o change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before ordering. 1 o this data sheet is applied for block type emifil r used for general electronics equipment for your design. 2009.1.8 noise suppression products/emi suppression filters > block type emifil r lc combined type 12.0 0.2 8.0 0.5 4.0 0.5 2.5 0.2 0.6 0.1 ? 0.8 0.1 ? 0.8 0.1 0.8 0.1 0.8 0.1 2.5 0.2 7.5 0.2 11.0 0.2 12.0 0.5 3.2 0.5 bnx*** *** : 012/016 (in mm) psg: power supply ground cg: load circuit ground cb: load circuit + bias cg cb cg b psg 90 80 70 60 50 40 30 20 10 0 0.001 0.01 0.1 1 10 100 1000 frequency (mhz) insertion loss (db) (50 ? - 50 ? ) BNX012-01 bnx016-01 l2 c2 l1 l3 c1 b psg cb cg (1)-(4): terminal number psg: power supply ground cg: circuit ground cb: circuit+b (1) (2) (3) (4) block type emifil r lc combined type bnx01* series dimensions insertion loss characteristics equivalent circuit packaging code packaging minimum quantity - box 150 rated value part number rated voltage withstand voltage rated current insulation resistance(min.) insertion loss BNX012-01 50vdc 125vdc 15a 500m ohm 1mhz to 1ghz:40db min. (20 to 25 degrees c line impedance=50 ohm) bnx016-01 25vdc 62.5vdc 15a 50m ohm 100khz to 1ghz:40db min. (20 to 25 degrees c line impedance=50 ohm) operating temperature range: -40 c to 125 c in operating temperatures exceeding +85 c, derating of current is necessary. continued on the following page.
continued from the preceding page. http://www.murata.com/ data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s specifications are subject t o change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before ordering. 2 o this data sheet is applied for block type emifil r used for general electronics equipment for your design. 2009.1.8 " in operating temperatures exceeding +85 c, derating of current is necessary for bnx01 p series. please apply the derating curve shown in chart according to the operating temperature. 15 10 5 0 1 85 -40 125 102.5 120 operating temperature [ c] derated current [a] derating " in case of using power line, please connect to each terminal as shown. power supply (bnx input) circuit bnx psg b cg cb psg b cg cb power supply ground power supply +bias power supply ground power supply -bias (bnx output) load circuit ground load circuit +bias load circuit ground load circuit -bias noise suppression products/emi suppression filters > block type emifil r lc combined type notice (rating) do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. ! caution (rating)
|
